Programming Presets into the EVO Remote
The EVO series BATCADDY comes with a programable remote control. You can change the preset speeds of the 1-4 buttons by following the steps below.
Power on the cart and remote control.
Set your cart to the desired speed using the up and down arrows on the remote control.
Video Linked Below
Related Articles
Syncing your remote control unit to the EVO Golf Caddy
Syncing your remote control unit to the EVO Golf Caddy 1. Make sure Remote Control is fully charged. 2 Plug in battery 3 Turn on remote 4 Press and hold the 3 and 4 buttons on the remote (light on remote will turn magenta) 5 Press and hold the ...How to Assemble Scorecard Holder for BATCADDY EVO
EVO Scorecard Holder To assemble the EVO scorecard holder you will need the scorecard holder, accessory bracket and Allen key. First remove the locking bolt from the accessory bracket and attach the scorecard holder. Next separate the two sides of ...BATCADDY EVO Umbrella Holder
The umbrella holder for the BATCADDY EVO is installed on the left side of the carts handle. The handle can be removed by turning it counter-clockwise Once the handle has been removed you can set aside the plastic spacer. Now match up the teeth on the ...Folding The Front Wheel of The BATCADDY EVO
See Video Linked Below https://workdrive.zoho.com/file/tuz2x678294ac692b4024a5058bb772fdc200 Note: The BATCADDY EVO II does not include the tool shown above. We found this tool to be unnecessary and recommend using the bag support to depress the ...Replacing the Controller on your BATCADDY X3,X4 and X8
Finding the Controller The controller is located in a compartment below the battery. Flip over the cart, you will notice a couple of screws holding a panel in place. Once these are removed you can slide away the panel exposing the carts controller. ...