Folding The Front Wheel of The BATCADDY EVO
See Video Linked Below
Note: The BATCADDY EVO II does not include the tool shown above. We found this tool to be unnecessary and recommend using the bag support to depress the button.
Related Articles
BATCADDY EVO Umbrella Holder
The umbrella holder for the BATCADDY EVO is installed on the left side of the carts handle. The handle can be removed by turning it counter-clockwise Once the handle has been removed you can set aside the plastic spacer. Now match up the teeth on the ...How to Assemble Scorecard Holder for BATCADDY EVO
EVO Scorecard Holder To assemble the EVO scorecard holder you will need the scorecard holder, accessory bracket and Allen key. First remove the locking bolt from the accessory bracket and attach the scorecard holder. Next separate the two sides of ...Front Wheel Tracking Adjustment for X3 Series BATCADDY
Front Wheel Tracking Adjustment for X3 Series BATCADDY The front wheel of the BATCADDY can be adjusted to compensate for how the cart is balanced. Find The Tracking Mechanism For the X3 series BATCADDY there is a small thumb wheel next to the front ...Adjusting the Front Wheel Tracking for the BATCADDY X4,X8 and X9
Find the Tracking Mechanism The tracking mechanism can be found attached to the front axle on the right side of the cart. You can loosen or tighten the two nuts on the mechanism to adjust the tracking. Release the Handle Before adjusting the ...Syncing your remote control unit to the EVO Golf Caddy
Syncing your remote control unit to the EVO Golf Caddy 1. Make sure Remote Control is fully charged. 2 Plug in battery 3 Turn on remote 4 Press and hold the 3 and 4 buttons on the remote (light on remote will turn magenta) 5 Press and hold the ...