Cellphone / GPS Holder

Cellphone / GPS Holder

Mounting the Cellphone/GPS Holder


Unscrew the clamp lock and remove the rubber adapter pieces from inside the clamp.





















Put the clamp on the carts handle and tighten lock to secure.











Attaching your Phone or Device


Use the buttons on the back of the holder to adjust the size of the holder.











Place your phone or device in the holder, and push the sides together to fit the device.











Pull the corners of the "rubber butterfly" around the corners of your phone to secure.









Rotate/Lock Device


Use the collar on the back of the device to loosen and tighten the holder and adjust position.







Adjusting the Arms


Remove the "wrench caps" from folding arms to tighten/loosen hex bolt and adjust.

    • Related Articles

    • BATCADDY EVO Umbrella Holder

      The umbrella holder for the BATCADDY EVO is installed on the left side of the carts handle. The handle can be removed by turning it counter-clockwise Once the handle has been removed you can set aside the plastic spacer. Now match up the teeth on the ...

    • Scorecard and Umbrella Holder Assembly Instructions

      Scorecard/Umbrella Holder Assembly Instructions 1. Unpack and Check Parts a. Mounting Bracket  b. Allen Wrench  c. Scorecard Holder & long Mounting Screw d. Umbrella Holder & short Mounting Screw 2. Open Mounting Bracket by loosening 2 Screws with ...

    • How to Assemble Scorecard Holder for BATCADDY EVO

      EVO Scorecard Holder To assemble the EVO scorecard holder you will need the scorecard holder, accessory bracket and Allen key. First remove the locking bolt from the accessory bracket and attach the scorecard holder. Next separate the two sides of ...